H3C s3100 series Command Manual page 992

Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Specify Ethernet1/0/1 as a trusted port .
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] dhcp-snooping ipv6 trust
display dhcp-snooping ipv6
Syntax
display dhcp-snooping ipv6 { all | unit unit-id }
View
Any view
Parameters
unit unit-id: Unit ID of a device.
Description
Use the display dhcp-snooping ipv6 command to display DHCPv6 snooping entries.
Among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all DHCPv6 snooping entries.
<Sysname>display dhcp-snooping ipv6 all
DHCP-Snooping IPV6 is enabled.
The client binding table for all untrusted ports.
Type : T--True , F--False
Unit ID : 1
Type IP Address
==== ========================= =============== ========= ==== =================
MAC Address Remaining VLAN Interface
lease
1-3