Destination-Port - H3C s3100 series Command Manual

undo destination-ip
View
HWPing test group view
Parameters
ip-address: Destination IP address of an HWPing (pronounced Hua'Wei Ping) test.
Description
Use the destination-ip command to configure a destination IP address of an HWPing test.
Use the undo destination-ip command to remove the configured destination IP address.
By default, no destination IP address is configured for an HWPing test.
Related commands: destination-port.
The destination address can be an IP address or a host name in HTTP test, while in other types of tests,
it must be an IP address.
Examples
# Set the destination IP address of an ICMP test to 169.254.10.3.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type icmp
[Sysname-hwping-administrator-icmp] destination-ip 169.254.10.3

destination-port

Syntax
destination-port port-number
undo destination-port
View
HWPing test group view
Parameters
port-number: Destination port number for an HWPing test, in the range of 1 to 50000.
Description
Use the destination-port command to configure a destination port number for an HWPing test.
Use the undo destination-port command to remove the configured destination port number.
1-5