H3C s3100 series Command Manual page 350

ReAuth Period
Quiet Period
Supp Timeout
Interval between version requests is 30s
Maximal request times for version information is 3
The maximal retransmitting times
EAD Quick Deploy configuration:
Url: http: //192.168.19.23
Free-ip: 192.168.19.0 255.255.255.0
Acl-timeout:
Total maximum 802.1x user resource number is 1024
Total current used 802.1x resource number is 1
Ethernet1/0/1 is link-up
802.1X protocol is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Version-Check is disabled
The port is an authenticator
Authentication Mode is Auto
Port Control Type is Port-based
ReAuthenticate is disabled
Max number of on-line users is 256
Authentication Success: 4, Failed: 2
EAPOL Packets: Tx 7991, Rx 14
Sent EAP Request/Identity Packets : 7981
EAP Request/Challenge Packets: 0
Received EAPOL Start Packets : 5
EAPOL LogOff Packets: 1
EAP Response/Identity Packets : 4
EAP Response/Challenge Packets: 4
Error Packets: 0
1. Authenticated user : MAC address: 000d-88f6-44c1
Controlled User(s) amount to 1
Ethernet1/0/2
......
Table 1-1 Description on the fields of the display dot1x command
Field
Equipment 802.1X protocol is
enabled
CHAP authentication is enabled
DHCP-launch is disabled
3600 s, ReAuth MaxTimes
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
30 m
802.1x protocol (802.1x for short) is enabled on the switch.
CHAP authentication is enabled.
DHCP-triggered. 802.1x authentication is disabled.
1-2
2
100 s
2
Description