Display Vlan - H3C s3100 series Command Manual

Examples
# Display the information about the voice VLAN.
<Sysname> display voice vlan status
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan security mode: Security
Voice Vlan aging time: 100 minutes
Current voice vlan enabled port mode:
PORT
--------------------------------
Ethernet1/0/2
Ethernet1/0/3
Table 1-1 Description on the fields of the display voice vlan status command
Voice Vlan status
Voice Vlan ID
Voice Vlan security mode
Voice Vlan aging time
Current voice vlan enable port mode
The Current voice vlan enable port mode field lists the ports with the voice VLAN function enabled.
Note that not all of them are transmitting packets in the voice VLAN. To view the ports operating in the
voice VLAN currently, use the display vlan command.

display vlan

Syntax
display vlan vlan-id
View
Any view
Parameters
vlan-id: Specifies the ID of the current voice VLAN in the range of 1 to 4094.
MODE
AUTO
MANUAL
Field
1-3
Description
The status of global voice VLAN function:
enabled or disabled.
The VLAN which is currently enabled with voice
VLAN.
The status of voice VLAN security mode:
enabled or disabled.
The voice VLAN aging time
The ports on which the voice VLAN function is
enabled.