Display Qos-Interface Traffic-Limit; Mirroring - H3C s3100 series Command Manual

View
Any view
Parameter
interface-type interface-number: Specifies the type and number of a port, for which the traffic mirroring
configuration information is to be displayed.
unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic mirroring configuration of all
the ports on the device is displayed.
Description
Use the display qos-interface mirrored-to command to display the traffic mirroring configuration of a
port or all the ports on the device.
Related command: mirrored-to.
Only H3C S3100-EI series switches support this command.
Example
# Display the traffic mirroring configuration of Ethernet 1/0/1 on an S3100-EI series switch.
<Sysname> display qos-interface Ethernet 1/0/1 mirrored-to
Ethernet1/0/1: mirrored-to
Inbound:
Matches: Acl 2000 rule 0
Mirrored to: monitor interface
Table 1-3 Description on the fields of the display qos-interface mirrored-to command
Field
Ethernet1/0/1:
Inbound
Matches
Mirrored to

display qos-interface traffic-limit

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-limit
View
Any view
running
Port with traffic mirroring configured
Inbound direction. That is, traffic mirroring is performed to the inbound
packets.
Match rule used for traffic classification
"monitor interface" indicates that the packets are duplicated to a port.
"cpu" indicates that the packets are duplicated to the CPU.
1-8
Description