Speed Auto; Storm-Constrain - H3C s3100 series Command Manual

[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] speed 10

speed auto

Syntax
speed auto [ 10 | 100 | 1000 ]*
View
Ethernet port view
Parameters
10: Configures 10 Mbps as an auto-negotiation speed of the port.
100: Configures 100 Mbps as an auto-negotiation speed of the port.
1000: Configures 1,000 Mbps as an auto-negotiation speed of the port (only available to
GigabitEthernet ports).
Description
Use the speed auto [ 10 | 100 | 1000 ]* command to configure auto-negotiation speed(s) for the current
port.
By default, the port speed is auto-negotiated.
The last configuration will take effect if you configure the command for multiple times.
Examples
# Configure 10 Mbps and 100 Mbps as the auto-negotiation speeds of Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] speed auto 10 100

storm-constrain

Syntax
storm-constrain { broadcast | multicast } max-packets min-packets { pps | kbps }
undo storm-constrain { all | broadcast | multicast }
View
Ethernet port view
Parameters
broadcast: Specifies to control broadcast traffic on the port.
multicast: Specifies to control multicast traffic on the port.
all: Cancels all the storm control threshold configurations on the port.
pps: Specifies the storm constrain threshold in packets.
kbps: Specifies the storm constrain threshold in kilobits per second (kbps).
1-30