Boot Web-Package - H3C s3100 series Command Manual

View
User view
Parameter
file-url: Path or the name of the app file in the Flash memory, a string comprising 1 to 64 characters.
Description
Use the boot boot-loader backup-attribute command to configure an app file of the device to be with
the backup attribute. The app file specified by this command becomes the backup startup file when the
device starts up next time. When the main startup file is unavailable, the backup startup file is used to
start the switch.
Example
# Configure the file named backup.bin to be the backup startup file of the device.
<Sysname> boot boot-loader backup-attribute backup.bin
Set boot file backup-attribute successfully on unit 1!

boot web-package

Syntax
boot web-package webfile { backup | main }
View
User view
Parameter
webfile: Name of a Web file, a string comprising 5 to 127 characters (including the extension .web).
main: Specifies the file to be with the main attribute.
backup: Specifies the file to be with the backup attribute.
Description
Use the boot web-package command to configure a Web file in the device to be with the main or
backup attribute.
The configuration of the main or backup attribute for a Web file takes effect immediately without
restarting the device.
After you upgrade a Web file, you need to specify the new Web file in the Boot menu after restarting
the switch or specify a new Web file by using the boot web-package command. Otherwise, the
Web server cannot function normally.
Related commands: display web package
1-16