Display Mac-Address - H3C s3100 series Command Manual

display mac-address

Syntax
display mac-address [ display-option ]
View
Any view
Parameters
display-option: Option used to display specific MAC address table information, as described in
1-1.
Table 1-1 Description on the display-option argument
mac-address [ vlan vlan-id ]
{ static | dynamic | blackhole } [ interface
interface-type interface-number ] [ vlan vlan-id ]
[ count ]
interface interface-type interface-number [ vlan
vlan-id ] [ count ]
vlan vlan-id [ count ]
count
statistics
mac-address: Specifies a MAC address, in the form of H-H-H.
static: Displays static MAC address entries.
dynamic: Displays dynamic MAC address entries.
blackhole: Displays blackhole MAC address entries.
interface-type interface-number: Specify a port by its interface type and number, of which the MAC
address entries are displayed.
vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094, in which the MAC address entries are
displayed.
count: Displays only the total number of the MAC address entries.
statistics: Displays statistics of the MAC address entries maintained by the switch.
Description
Use the display mac-address command to display information about MAC address entries in the MAC
address table, including: MAC address, VLAN and port corresponding to the MAC address, the type
(static or dynamic) of a MAC address entry, whether a MAC address is within the aging time and so on.
Value
Displays information about a specified MAC
address entry.
Displays information about dynamic, static, or
blackhole MAC address entries.
Displays information about the MAC address
entries concerning a specified port.
Displays information about the MAC address
entries concerning a specified VLAN.
Displays the total number of the MAC address
entries maintained by the switch.
Displays statistics of the MAC address entries
maintained by the switch.
1-2
Description
Table