Display Ntdp Device-List - H3C s3100 series Command Manual

display ntdp device-list

Syntax
display ntdp device-list [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed information of devices in a cluster.
Description
Use the display ntdp device-list command to display the cluster device information collected by
NTDP.
Examples
# Display the list of devices collected by NTDP.
<Sysname> display ntdp device-list
MAC
000f-e20f-3901
000f-e20f-3190
Table 2-3 Description on the fields of the display ntdp device-list command
MAC
HOP
IP
PLATFORM
# Display detailed device information collected by NTDP.
[1234_0.Sysname]display ntdp device-list verbose
Hostname : 1234_0.Sysname
MAC : 00e0-fc11-1111
Hop : 0
Platform : S3100
IP : 192.168.0.234/24
Version :
H3C Comware Platform Software
Comware Software, Version 3.10
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co.,Ltd.All rights reserved.
S3100 3100-0002
Cluster :
Stack :
Peer MAC
HOP IP
0 100.100.1.1/24
1 16.1.1.1/24
Field
Administrator switch of cluster 1234
Candidate switch
Peer Port ID
PLATFORM
S3100
S3100
MAC address of a device collected by NTDP
Hops from this device to the collected device
IP address and mask length of the management
VLAN interface on the collected device
Platform information about the collected device
Native Port ID
2-7
Description
Speed Duplex