Shutdown - H3C s3100 series Command Manual

View
User view
Parameter
interface-type: Port type.
interface-number: Port number.
For details about the parameters, see the parameter description of the interface command.
Description
Use the reset counters interface command to clear the statistics of the port, preparing for a new
statistics collection.
If you specify neither port type nor port number, the command clears statistics of all ports.
If specify only port type, the command clears statistics of all ports of this type.
If specify both port type and port number, the command clears statistics of the specified port.
The statistics of the 802.1x-enabled ports cannot be cleared.
Example
# Clear the statistics of Ethernet1/0/1.
<Sysname> reset counters interface ethernet1/0/1

shutdown

Syntax
shutdown
undo shutdown
View
Ethernet port view
Parameter
None
Description
Use the shutdown command to shut down an Ethernet port.
Use the undo shutdown command to bring up an Ethernet port.
By default, an Ethernet port is in up state.
1-28