Info-Center Logbuffer; Info-Center Loghost - H3C s3100 series Command Manual

<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center enable
% Information center is enabled

info-center logbuffer

Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]*
undo info-center logbuffer [ channel | size ]
View
System view
Parameter
channel: Sets the channel through which information outputs to the log buffer.
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the system.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console,
monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9.
size buffersize: Specifies the size of the log buffer (number of messages the buffer holds) you want to
display. The buffersize argument ranges from 0 to 1,024 and defaults to 512.
Description
Use the info-center logbuffer command to enable information output to the log buffer.
Use the undo info-center logbuffer command to disable information output to the log buffer.
By default, information output to the log buffer is enabled with channel 4 (logbuffer) as the default
channel and a maximum buffer size of 512.
This command works only when the information center is enabled.
Related command: info-center enable, display info-center.
Example
# Configure the system to output information to the log buffer with the size of 50.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center logbuffer size 50

info-center loghost

Syntax
info-center loghost host-ip-addr [ channel { channel-number | channel-name } | facility
local-number ]*
undo info-center loghost host-ip-addr
View
System view
1-8