Display Ip Source Static Binding - H3C s3100 series Command Manual

View
Any view
Parameters
None
Description
Use the display dhcp-snooping trust command to display the (enabled/disabled) state of the DHCP
snooping function and the trusted ports.
Note that among S3100 series switches, only S3100-EI series switches support the command.
Related commands: dhcp-snooping trust.
Examples
# Display the state of the DHCP snooping function and the trusted ports.
<Sysname> display dhcp-snooping trust
DHCP-Snooping is enabled.
DHCP-Snooping trust become effective.
Interface
===================== =================
Ethernet1/0/10
The above display information indicates that the DHCP snooping function is enabled, and the Ethernet
1/0/10 port is a trusted port.

display ip source static binding

Syntax
display ip source static binding [ vlan vlan-id | interface interface-type interface-number ]
View
Any view
Parameters
vlan-id: ID of the VLAN whose IP static binding entries are to be displayed.
interface-type interface-number: Type and number of the port whose IP static binding entries are to be
displayed.
Description
Use the display ip source static binding command to display the IP static binding entries configured.
If you specify a VLAN, all the IP static binding entries for the specified VLAN will be displayed. If you
specify a port, all the IP static binding entries for the specified port will be displayed.
Note that among S3100 series switches, only S3100-EI series switches support the two commands.
Examples
# Display all IP static binding entries configured.
<Sysname> display ip source static binding
Trusted
Trusted
2-12