H3C s3100 series Command Manual page 767

View
Any view
Parameter
None
Description
Use the display ntp-service status command to display the status of NTP services.
Example
# View the status of the NTP service of the local switch.
<Sysname> display ntp-service status
Clock status: synchronized
Clock stratum: 4
Reference clock ID: 1.1.1.11
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^18
Clock offset: 0.8174 ms
Root delay: 37.86 ms
Root dispersion: 45.98 ms
Peer dispersion: 35.78 ms
Reference time: 16:30:46.078 UTC Mar 29 2007(C9689FB6.1431593E)
Table 1-2 Description on the fields of the display ntp-service status command
Field
Clock status
Clock stratum
Reference clock ID
Nominal frequency
Actual frequency
Clock precision
Clock offset
Root delay
Root dispersion
Peer dispersion
Reference time
Status of the local clock:
Synchronized
Unsynchronized
Stratum of the local clock
Address of the remote server or ID of the reference clock after the
local clock is synchronized to a remote NTP server or a reference
clock
Nominal frequency of the local hardware clock, in Hz.
Actual frequency of the local hardware clock, in Hz.
Precision of the local hardware clock
Offset of the local clock relative to the reference clock, in
milliseconds.
Roundtrip delay between the local clock and the primary reference
clock source, in milliseconds.
Maximum dispersion of the local clock relative to the primary
reference clock, in milliseconds.
Maximum dispersion of the remote NTP server, in milliseconds.
Reference timestamp
1-3
Description