H3C s3100 series Command Manual page 100

Description
Use the reset ip routing-table statistics protocol command to clear the statistics of routes in a routing
table.
Example
# Before executing the reset ip routing-table statistics protocol command, use the display ip
routing-table statistics command to display the routing statistics:
<Sysname> display ip routing-table statistics
Routing tables:
Proto route
DIRECT 4
STATIC 0
Total 4
# Clear the routing statistics of all protocols from the IP routing table.
<Sysname> reset ip routing-table statistics protocol all
This will erase the specific routing counters information.
Are you sure?[Y/N]y
# Display the routing statistics in the IP routing table.
<Sysname> display ip routing-table statistics
Routing tables:
Proto route
DIRECT 4
STATIC 0
Total 4
The above information shows that the routing statistics in the IP routing table is cleared.
active added
4 24
0 1
4 25
active added
4 0
0 0
4 0
1-17
deleted
20
1
21
deleted
0
0
0