Description
Use the max-response-time command to configure the maximum response time for MLD general
queries globally.
Use the undo max-response-time command to restore the system default.
By default, the maximum response time for MLD general queries is 10 seconds.
This command works only on MLD snooping–enabled VLANs.
Related commands: mld-snooping max-response-time, mld-snooping query-interval.
Examples
# Set the maximum response time for MLD general queries globally to 5 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
mld-snooping
Syntax
mld-snooping
undo mld-snooping
View
System view
Default Level
2: System level
Parameters
None
Description
Use the mld-snooping command to enable MLD snooping globally and enter MLD-Snooping view.
Use the undo mld-snooping command to disable MLD snooping globally.
By default, MLD snooping is disabled.
Related commands: mld-snooping enable.
Examples
# Enable MLD snooping globally and enter MLD-Snooping view.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping]
2-8