Stp Port Priority - H3C s3100 series Command Manual

# Configure the links connected to Ethernet 1/0/2 to Ethernet 1/0/4 as point-to-point links in system
view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp interface Ethernet 1/0/2 to Ethernet 1/0/4 point-to-point force-true

stp port priority

Syntax
Ethernet port view:
stp [ instance instance-id ] port priority priority
undo stp [ instance instance-id ] port priority
System view:
stp interface interface-list instance instance-id port priority priority
undo stp interface interface-list instance instance-id port priority
View
System view, Ethernet port view
Parameters
instance-id: MSTI ID ranging from 0 to 16. The value of 0 refers to the CIST.
port priority priority: Sets the port priority. The priority argument ranges from 0 to 240 and must be a
multiple of 16 (such as 0, 16, and 32).
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this argument in the
form of interface-list = { interface-type interface-number [ to interface-type interface-number ] } &<1-10>,
where &<1-10> means that you can provide up to 10 port indexes/port index ranges for this argument.
Description
Use the stp port priority command to set the port priority of the current port in the specified MSTI.
Use the undo stp port priority command to restore the default port priority of the current port in
the specified MSTI.
Use the stp interface port priority command to set a port priority for the specified ports in the
specified MSTI in system view. Use the undo stp interface port priority command to restore the
default priority of the specified ports in the specified MSTI in system view.
The default port priority of a port in any MSTI is 128.
If you specify the instance-id argument to 0 or do not specify the argument, the two commands apply to
the port priorities of ports on the CIST. The role a port plays in a MSTI is determined by the port priority
in the instance. A port on a MSTP-enabled switch can have different port priorities and play different
roles in different MSTIs. This enables packets of different VLANs to be forwarded along different
physical links, so as to implement VLAN-based load balancing. Changing port priorities result in port
role recalculation and state transition.
Examples
# Set the port priority of Ethernet 1/0/1 in MSTI 2 to 16.
Set the port priority of Ethernet 1/0/1 in MSTI 2 to 16 in Ethernet port view.
1-32