Display Ipv6 Fib - H3C s3100 series Command Manual

--- 0 dhcp-snooping Ipv6 item(s) of unit 1 found
display dns ipv6 dynamic-host
Syntax
display dns ipv6 dynamic-host
View
Any view
Parameters
None
Description
Use the display dns ipv6 dynamic-host command to display IPv6 dynamic domain name information
in the cache, including the domain name, IPv6 address, and TTL of the DNS entries.
You can use the reset dns ipv6 dynamic-host command to clear all IPv6 dynamic domain name
information from the cache.
Examples
# Display IPv6 dynamic domain name information in the cache.
<Sysname> display dns ipv6 dynamic-host
No. Domain-name
1 aaa
Table 1-1 Description on the fields of the display dns ipv6 dynamic-host command
No.
Domain-name
IPv6 Address
TTL
When you use the display dns ipv6 dynamic-host command to check the IPv6 dynamic domain
names in the cache, the system will display the first 21 characters of the domain names if they contain
more than 21 characters. This is because the domain name displayed in the Domain-name field can be
up to 21 characters in length.

display ipv6 fib

Syntax
display ipv6 fib
IPv6 Address
2001::2
Field
---
Sequence number
Domain name
IPv6 address of the corresponding domain name
Time-to-live of the domain name in the cache in seconds
1-4
TTL
6
Description