Dns-Server - H3C s3100 series Command Manual

Unknown result lost packet number

dns-server

Syntax
dns-server ip-address
undo dns-server
View
HWPing test group view
Parameters
ip-address: IP address to be assigned to a domain name server (DNS).
Description
Use the dns-server command to configure the IP address of a DNS server.
Use the undo dns-server command to remove the IP address of a DNS server.
By default, no DNS server IP address is configured.
This command applies to DNS and HTTP tests only.
For an HTTP test, if configuring the destination address as the host name, you must configure the
IP address of the DNS server to resolve the host name into an IP address, which is the destination
IP address of this HTTP test
Examples
# Set the IP address of the DNS server to 169.254.10.5.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator dns
[Sysname-hwping-administrator-dns] test-type dns
[Sysname-hwping-administrator-dns] dns-server 169.254.10.5
dns resolve-target
Syntax
dns resolve-target domain-name
undo dns resolve-target
Field
1-15
Description
The number of the lost packets for unknown
reason