H3C s3100 series Command Manual page 1006

Table 1-12 Description on the fields of the display ipv6 socket command
SOCK_STREAM
Task
socketid
Proto
LA
FA
sndbuf
rcvbuf
sb_cc
rb_cc
socket option
socket state
SOCK_DGRAM
SOCK_RAW
display ipv6 source static binding
Syntax
display ipv6 source static binding [ vlan vlan-id | interface interface-type interface-number | unit
unit-id ]
View
Any view
Parameters
vlan-id: ID of the VLAN whose IPv6 static binding entries are to be displayed.
interface-type interface-number: Type and number of the port whose IP static binding entries are to be
displayed.
unit-id: Unit ID of a device.
Description
Use the display ipv6 source static binding command to display the IPv6 static binding entries
configured. If you specify a VLAN, all the IPv6 static binding entries for the specified VLAN will be
displayed. If you specify a port, all the IPv6 static binding entries for the specified port will be displayed.
Field
Socket type, which can be:
SOCK_STREAM: Refers to TCP.
SOCK_DGRAM: Refers to UDP.
SOCK_RAW: Refers to raw IP.
Task name and ID of the created socket
ID assigned by the kernel to the created socket
Protocol ID
Local address and local port number
Remote address and remote port number
Size of the sending buffer
Size of the receiving buffer
Number of bytes sent by the sending buffer
Number of bytes received by the receiving buffer
Socket option set by the application
State of the socket
UDP socket
Raw IP socket
1-17
Description