H3C s3100 series Command Manual page 45

group-name: Name of the group to which the user corresponds. This argument is a string of 1 to 32
characters.
cipher: Specifies the authentication or encryption password to be in ciphertext.
authentication-mode: Requires authentication. If this keyword is not provided, neither authentication
nor encryption is performed.
md5: Adopts HMAC-MD5 algorithm.
sha: Adopts HMAC-SHA algorithm.
auth-password: Authentication password, a string of 1 to 64 characters in plain text, a 32-bit
hexadecimal number in cipher text if MD5 algorithm is used, and a 40-bit hexadecimal number in cipher
text if SHA algorithm is used.
privacy: Encrypts packets.
des56: Specifies data encryption standard (DES) for encrypting.
aes128: Specifies advanced encryption standard (AES) for encrypting.
priv-password: Encryption password, a string of 1 to 64 characters in plain text, a 32-bit hexadecimal
number in cipher text if MD5 algorithm is used, and a 40-bit hexadecimal number in cipher text if SHA
algorithm is used.
acl-number: Basic ACL number, ranging from 2000 to 2999.
local: Specifies local entity users.
engineid-string: Engine ID associated with the user, a string of even number of hexadecimal numbers
and comprising of 10 to 64 hexadecimal digits.
Description
Use the snmp-agent usm-user command to add a user to an SNMP group. You can also optionally
use this command to apply an ACL for network management users.
Use the undo snmp-agent usm-user command to remove an SNMP user from the corresponding
SNMP group and to remove the ACL configuration on the user.
Examples
# Add a user named aaa to an SNMP group named group1, specify to require authentication, specify
the authentication protocol as HMAC-MD5-96 and authentication password as 123, and apply ACL
2002 to filter network management users (assuming that ACL 2002 already exists).
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent usm-user v3 aaa group1 authentication-mode md5 123 acl 2002
2-5