H3C s3100 series Command Manual page 873

Field
Trap buffer
Information timestamp
setting:
display logbuffer
Syntax
display logbuffer [ unit unit-id ] [ level severity | size buffersize ]* [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameter
unit-id: Unit ID of the device, the value can only be 1.
level severity: Specifies an information severity level. The severity argument ranges from 1 to 8.
Table 1-2 Severity level defined in the information center
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
size buffersize: Specifies the size of the log buffer (number of messages the log buffer holds) you want
to display. The buffersize argument ranges from 1 to 1,024 and defaults to 512.
|: Filters output log information with a regular expression.
begin: Displays the line that matches the regular expression and all the subsequent lines..
exclude: Displays the log information excluding the specified characters.
include: Displays the log information including the specified characters.
regular-expression: Regular expression.
Information about the trap buffer, including its state (enabled or
disabled), maximum size, current size, current messages, channel
number and name, number of dropped messages, and number of
overwritten messages
Information about the time stamp setting, showing the time stamp format
of the log, trap and debugging information
Severity value
1
2
3
4
5
6
7
8
1-3
Description
Description
The system is unavailable.
Information that demands prompt reaction
Critical information
Error information
Warnings
Normal information that needs to be noticed
Informational information to be recorded
Information generated during debugging