Authorization - H3C s3100 series Command Manual

Examples
# Set the HWTACACS scheme to ht for user level switching in the current ISP domain aabbcc.net.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] authentication super hwtacacs-scheme ht

authorization

Syntax
authorization { local | none | hwtacacs-scheme hwtacacs-scheme-name [ local ] }
undo authorization
View
ISP domain view
Parameters
local: Performs local authorization.
none: Specifies not to use any authorization scheme.
hwtacacs-scheme hwtacacs-scheme-name: Specifies to use an HWTACACS scheme. Here,
hwtacacs-scheme-name is the name of an HWTACACS scheme; it is a string of up to 32 characters.
Description
Use the authorization command to configure an authorization scheme for current ISP domain.
Use the undo authorization command to restore the default authorization scheme setting of the ISP
domain.
By default, no separate authorization scheme is configured for an ISP domain.
Note that:
The HWTACACS scheme specified for the current ISP domain must have been configured.
The authorization method specified with the authorization command is for all types of users and
has a priority lower than that for a specific access mode.
Related commands: scheme, radius scheme, hwtacacs scheme.
Examples
# Allow users in ISP domain aabbcc.net to access network services without being authorized.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] authorization none
1-10