Display Hwping - H3C s3100 series Command Manual

By default, no destination port number is configured for a test.
Related commands: destination-ip.
The destination-port command has effect on jitter, TCP-Private, and UDP-Private tests only.
It is not recommended to perform a TCP, UDP, or jitter test on a well-known port (ports with a
number ranging from 1 to 1023) or on a port with a port number greater than 50000. Otherwise, the
HWPing test will fail or the corresponding service of the well-known port will become unavailable.
Examples
# Set the destination port number for a tcpprivate test to 9000.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator tcp
[Sysname-hwping-administrator-tcp] test-type tcpprivate
[Sysname-hwping-administrator-tcp] destination-port 9000

display hwping

Syntax
display hwping { results | history | jitter } [ administrator-name operation-tag ]
View
Any view
Parameters
results: Displays results of the last test.
history: Displays the history records of tests.
jitter: Displays the jitter test information.
administrator-name: Name of the administrator who created the HWPing test operation, a string of 1 to
32 characters.
operation-tag: Operation tag, a string of 1 to 32 characters.
Description
Use the display hwping command to display the result of the last HWPing test or the history of
HWPing tests.
Without administrator-name test-operation-tag specified, the command displays the results of all test
groups; without administrator-name test-operation-tag specified, the command displays the results of
the specified test group.
Related commands: test-enable.
1-6