Get - H3C s3100 series Command Manual

View
User view
Parameters
cluster: Connects to the configured FTP server of a cluster. For the configuration of the FTP server of a
cluster, refer to the Cluster part of this manual.
remote-server: Host name or IP address of an FTP server, a string of 1 to 20 characters.
port-number: Port number of the FTP server, in the range 0 to 65535. The default is 21.
Description
Use the ftp command to establish a control connection with an FTP server. If you enter a correct
username and password, you can enter FTP client view.
Examples
# Connect to the FTP server whose IP address is 2.2.2.2.
<Sysname> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):admin
331 Password required for admin.
Password:
230 User logged in.
[ftp]

get

Syntax
get remotefile [ localfile ]
View
FTP client view
Parameters
remotefile: Name of a file to be downloaded.
localfile: File name used when a file is downloaded and saved to the local device. If this argument is not
specified, the source file name is used when a file is saved and downloaded to the local device.
Description
Use the get command to download a remote file and save it as a local file.
1-11