Interface Vlan-Interface - H3C s3100 series Command Manual

Hide thumbs Also See for s3100 series:
Table of Contents

Advertisement

Examples
# Display information about VLAN 1.
<Sysname> display vlan 1
VLAN ID: 1
VLAN Type: static
Route Interface: configured
IP Address: 192.168.0.39
Subnet Mask: 255.255.255.0
Description: VLAN 0001
Name: VLAN 0001
Tagged
Ports:
Ethernet1/0/1
Untagged Ports:
Ethernet1/0/2
Table 1-2 Description on the fields of the display vlan command
Field
VLAN ID
VLAN Type
Route Interface
IP Address
Subnet Mask
Description
Name
Tagged Ports
Untagged Ports

interface Vlan-interface

Syntax
interface Vlan-interface vlan-id
undo interface Vlan-interface vlan-id
View
System view
Parameters
vlan-id: Specifies the ID of a VLAN interface, in the range of 1 to 4094.
VLAN ID.
VLAN type (dynamic or static).
Indicates whether the VLAN interface of the VLAN is configured
with an IP address for routing.
Primary IP address of the VLAN interface (available only on a
VLAN interface configured with an IP address). You can use the
display interface vlan-interface command in any view or the
display this command in VLAN interface view to display its
secondary IP address(es), if any.
Subnet mask of the IP address of the VLAN interface.
Description of the VLAN.
VLAN name.
Ports out of which packets are sent tagged.
Ports out of which packets are sent untagged.
1-4
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents