Disconnect; Ftp - H3C s3100 series Command Manual

Hide thumbs Also See for s3100 series:

Table of Contents

226 Transfer complete.

FTP: 1025 byte(s) received in 0.019 second(s) 53.00K byte(s)/sec.

# Display information about file config.cfg and save the information to file temp1.

[ftp] dir config.cfg temp1

227 Entering Passive Mode (192,168,0,152,4,3).

125 ASCII mode data connection already open, transfer starting for config.cfg.

.....226 Transfer complete.

FTP: 67 byte(s) received in 5.818 second(s) 11.00 byte(s)/sec.

disconnect

FTP client view

Use the disconnect command to terminate an FTP connection without quitting FTP client view.

This command has the same effect as that of the close command.

# Terminate the FTP connection without quitting FTP client view.

[ftp] disconnect

221 Server closing.

ftp [ cluster | remote-server [ port-number ] ]

2833 May 11 17:58 config.cfg

225295 Apr 26 12:21 default.diag

377424 Apr 30 16:58 switch.btm

0 Apr 28 11:41 test

2145 Apr 28 13:13 test.txt

13 Apr 28 13:21 mytest.bak

9 Apr 28 13:24 a.txt

5292802 Apr 30 17:02 switch2.bin

15 Apr 26 17:45 public

15 Apr 26 17:56 temp.c

5286666 Oct 18

306 May 13 11:17 swithc001

2006 myopenssh

2006 switch5.bin

Show Quick Links

Table of Contents