H3C s3100 series Command Manual page 429

Primary Acc State=active,
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 1-5 Description on the fields of the display radius scheme command
Field
SchemeName
Index
Type
Primary Auth IP/Port
Primary Acct IP/Port
Second Auth IP/Port
Second Acct IP/Port
Auth Server Encryption Key
Acct Server Encryption Key
Accounting method
Accounting-On packet enable, send
times = 15 , interval = 3s
TimeOutValue(in second)
RetryTimes
RealtimeACCT(in minute)
Permitted send realtime PKT failed
counts
Retry sending times of noresponse
acct-stop-PKT
Quiet-interval(min)
Username format
Data flow unit
Packet unit
calling_station_id format
Primary Auth State
Second Auth State
Primary Acc State
Second Acc State
Second Acc State=block
Name of the RADIUS scheme
Index number of the RADIUS scheme
Type of the RADIUS servers
IP address/port number of the primary authentication
server
IP address/port number of the primary accounting server
IP address/port number of the secondary authentication
server
IP address/port number of the secondary accounting
server
Shared key for the authentication servers
Shared key for the accounting servers
Accounting method
The switch sends up to 15 Accounting-On messages at
intervals of 3 seconds after restarting.
RADIUS server response timeout time
Maximum number of transmission attempts of a RADIUS
request
Real-time accounting interval in minutes
maximum allowed number of continuous real-time
accounting failures
Maximum number of transmission attempts of the
buffered stop-accounting requests
Time that the switch must wait before it can restore the
status of a primary server to active
Username format
Data unit of data flow
Packet unit of data flow
MAC address format of the Calling-Station-Id (Type 31)
field in RADIUS packets
Status of the primary authentication server
Status of the secondary authentication server
Status of the primary accounting server
Status of the secondary accounting server
1-40
Description