Info-Center Synchronous - H3C s3100 series Command Manual

Table 1-4 Default output rules for different output destinations
Output
Modules
destinati
allowed
on
default (all
Console
modules)
Monitor default (all
terminal modules)
default (all
Log host
modules)
Trap default (all
buffer modules)
default (all
Log buffer
modules)
SNMP default (all
module modules)
default (all
Log file
modules)
Examples
# Set the output channel for the log information of VLAN module to snmpagent and to output
information with severity being emergencies. Log information of other modules cannot be output to this
channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent log state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on
# Set the output channel for the log information of VLAN module to snmpagent and to output
information with severity being emergencies. Log information of other modules and all the other
system information cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent debug state off log state off trap
state off
[Sysname] info-center source vlan channel snmpagent log level emergencies state on

info-center synchronous

Syntax
info-center synchronous
undo info-center synchronous
View
System view
LOG
Enabled/
Severity
disabled
Enabled warnings
Enabled warnings
informatio
Enabled
nal
informatio
Disabled
nal
Enabled warnings
debuggin
Disabled
g
debuggin
Enabled
g
1-13
TRAP
Enabled/
Severity
disabled
Enabled debugging
Enabled debugging
Enabled debugging
Enabled warnings
Disabled debugging
Enabled warnings
Enabled debugging
DEBUG
Enabled/
Severity
disabled
Enabled debugging
Enabled debugging
Disabled debugging
Disabled debugging
Disabled debugging
Disabled debugging
Disabled debugging