#
vlan 1
#
vlan 5 to 69
#
vlan 70
description Vlan 70
#
vlan 71 to 100
#
return
display saved-configuration
Syntax
display saved-configuration [ unit unit-id ] [ by-linenum ]
View
Any view
Parameters
unit unit-id: Specifies the unit ID of a switch. It only can be 1.
by-linenum: Displays configuration information with line numbers.
Description
Use the display saved-configuration command to display the initial configuration file of a switch.
Note that:
If the switch starts up without a configuration file, the system will display that no configuration file
exists upon execution of the command.
If you have saved configuration after the switch starts up, the command displays the last saved
configuration.
Related commands: save, reset saved-configuration, display current-configuration.
Examples
# Display the initial configuration file of the current switch.
<Sysname> display saved-configuration
#
sysname Sysname
#
radius scheme system
#
domain system
#
vlan 1
#
interface Vlan-interface1
1-6