Domain - H3C s3100 series Command Manual

Examples
# Display information about all local users.
<Sysname> display local-user
0 The contents of local user test:
State:
Idle-cut:
Access-limit:
Max AccessNum:
Bind location:
Vlan ID:
Authorization VLAN:
IP address:
MAC address:
Total 1 local user(s) Matched, 1 listed.
ServiceType Mask Meaning: C--Terminal
Table 1-3 describes the fields in the above display output.
Table 1-3 Description on the fields of the display local-user command
State
ServiceType Mask
Idle-cut
Access-limit
Current AccessNum
Bind location
Vlan ID
Authorization VLAN
IP address
MAC address

domain

Syntax
domain { isp-name | default { disable | enable isp-name } }
undo domain isp-name
Active
Enable
Enable
1024
127.0.0.1/1/0/2 (NAS/UNITID/SUBSLOT/PORT)
1
2
192.168.0.108
000d-88f6-44c1
F--FTP
Field
1-17
ServiceType Mask: L
Idle TimeOut: 3600 seconds
Current AccessNum: 1
L--LanAccess S--SSH
Description
Status of the local user
Service type mask:
T means Telnet service.
S means SSH service.
C means client service.
LM means lan-access service.
F means FTP service.
None means no defined service.
Status of the idle-cut function
Limit on the number of access users
Number of current access users
Whether or not bound to a port
VLAN of the user
Authorized VLAN of the user
IP address of the user
MAC address of the user
T--Telnet