Management-Vlan; Reset Ip Routing-Table Statistics Protocol - H3C s3100 series Command Manual

A static route with both its destination IP address and mask both being 0.0.0.0 is the default route.
When no matched entry is found in the routing table, a received packet is forwarded according to
the default route.
Related command: display ip routing-table.
Example
# Configure the next hop of the default route as 129.102.0.2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ip route-static 0.0.0.0 0.0.0.0 129.102.0.2

management-vlan

Syntax
management-vlan vlan-id
undo management-vlan
View
System view
Parameter
vlan-id: ID of the management VLAN, in the range of 1 to 4094.
Description
Use the management-vlan command to configure a VLAN as the management VLAN.
Use the undo management vlan command to restore the default.
VLAN 1 is the default management VLAN.
Example
# Configure VLAN 2 as the management VLAN.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] management-vlan 2

reset ip routing-table statistics protocol

Syntax
reset ip routing-table statistics protocol { all | protocol }
View
User view
Parameter
all: Specifies all protocols.
protocol: Specifies a protocol, which can be static, or direct.
1-16