Mac-Vlan Enable - H3C s3100 series Command Manual

View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display mac-vlan interface command to display all the ports with MAC address-based VLAN
enabled.
Related commands: mac-vlan enable.
Examples
# Display all the interfaces with MAC address-based VLAN enabled.
<Sysname> display mac-vlan interface
MAC VLAN is enabled on following ports:
---------------------------------------
Ethernet1/0/10

mac-vlan enable

Syntax
mac-vlan enable
undo mac-vlan enable
View
Ethernet port view
Default Level
2: System level
Parameters
None
Description
Use the mac-vlan enable command to enable MAC address-based VLAN on a port.
Use the undo mac-vlan enable command to disable MAC address-based VLAN on a port.
By default, MAC address-based VLAN is disabled on a port.
Examples
# Enable MAC address-based VLAN on Ethernet1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
Ethernet1/0/11 Ethernet1/0/12
1-16