Ntp-Service In-Interface Disable; Ntp-Service Max-Dynamic-Sessions - H3C s3100 series Command Manual

Description
Use the ntp-service broadcast-server command to configure an Ethernet switch to operate in the
NTP broadcast server mode and send NTP broadcast messages through the current interface.
Use the undo ntp-service broadcast-server command to remove the configuration.
By default, no NTP operate mode is configured.
Example
# Configure the switch to send NTP broadcast messages through Vlan-interface1 and use
authentication key 4 for encryption, and set the NTP version number to 3.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ntp-service broadcast-server authentication-key 4 version 3

ntp-service in-interface disable

Syntax
ntp-service in-interface disable
undo ntp-service in-interface disable
View
VLAN interface view
Parameter
None
Description
Use the ntp-service in-interface disable command to disable the interface from receiving NTP
messages.
Use the undo ntp-service in-interface disable command to restore the default.
By default, the interface can receive NTP messages.
Example
# Disable Vlan-interface1 from receiving NTP messages.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ntp-service in-interface disable

ntp-service max-dynamic-sessions

Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
1-8