H3C s3100 series Command Manual page 155

Field
Output(normal): - packets, - bytes
- broadcasts, - multicasts, - pauses
output errors
- underruns
- buffer failures
aborts
deferred
collisions
late collisions
lost carrier
- no carrier
For S3100-EI series Ethernet switches, the maximum frame size allowed on an Ethernet port is
2048 bytes.
For S3100-SI series Ethernet switches, the maximum frame size allowed on an Ethernet port of
S3100-52TP-SI is 2048 bytes, and the maximum frame size allowed on an Ethernet port of other
S3100-SI series Ethernet switches is 1536 bytes.
Count in packets and in bytes of outgoing normal
packets on the port, including outgoing normal
packets and normal Pause frames.
The number of normal outgoing broadcast
packets, the number of normal outgoing
multicast packets, and the number of normal
outgoing Pause frames on the port.
A hyphen (-) indicates that the statistical item is
not supported.
The total number of outgoing error frames
The number of packets dropped because the
transmitting rate of the port exceeds the
processing capacity of the output queue, which
is a rare hardware error.
The number of packets dropped due to
insufficient transmit buffer on the port
The number of transmission failures due to
various reasons, such as collisions
The number of first transmission attempts
delayed because of detection of collisions
The number of detected collisions
(Transmission of a frame will be aborted upon
detection of a collision.)
The number of detected late collisions
(A late collision occurs if the transmission of a
frame defers due to detection of collision after its
first 512 bits have been transmitted.)
The lost carrier counter applicable to serial WAN
interfaces
The counter increases by 1 upon each carrier
loss detected during frame transmission.
The no carrier counter applicable to serial WAN
interfaces
The counter increases by 1 upon each carrier
detection failure for frame transmission.
1-10
Description