Dot1X Port-Method - H3C s3100 series Command Manual

unauthorized-force: Specifies to operate in unauthorized-force access control mode. When a port
operates in this mode, the hosts connected to it cannot access the network resources.
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
Description
Use the dot1x port-control command to specify the access control mode for specified Ethernet ports.
Use the undo dot1x port-control command to revert to the default access control mode.
The default access control mode is auto.
Use the dot1x port-control command to configure the access control mode for specified
802.1x-enabled ports.
In system view:
If you do not provide the interface-list argument, these two commands apply to all the ports of the
switch.
If you specify the interface-list argument, these commands apply to the specified ports.
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
Related command: display dot1x.
Example
# Specify Ethernet1/0/1 port to operate in unauthorized-force access control mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x port-control unauthorized-force interface Ethernet 1/0/1

dot1x port-method

Syntax
dot1x port-method { macbased | portbased } [ interface interface-list ]
undo dot1x port-method [ interface interface-list ]
View
System view, Ethernet port view
Parameter
macbased: Performs MAC address-based authentication.
portbased: Performs port-based authentication.
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
1-12