Mac-Authentication Timer Guest-Vlan-Reauth - H3C s3100 series Command Manual

Examples
# Set the maximum number of MAC address authentication users allowed to access Ethernet 1/0/2 to
100.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/2
[Sysname-Ethernet1/0/2] mac-authentication max-auth-num 100

mac-authentication timer guest-vlan-reauth

Syntax
mac-authentication timer guest-vlan-reauth interval
undo mac-authentication timer guest-vlan-reauth
View
System view
Parameters
interval: Interval at which the switch re-authenticates users in guest VLANs. This argument is in the
range of 1 to 3,600 in seconds.
Description
Use the mac-authentication timer guest-vlan-reauth command to configure the interval at which the
switch re-authenticates users in guest VLANs. If the user of a port passes the authentication, the port
will leave the guest VLAN and return to the initial VLAN configured for it.
Use the undo mac-authentication timer guest-vlan-reauth command to restore the re-authentication
interval to the default value.
The switch re-authenticates the users in guest VLANs at the interval of 30 seconds by default.
Examples
# Configure the switch to re-authenticate users in Guest VLANs at the interval of 60 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] mac-authentication timer guest-vlan-reauth 60
1-13