Display Igmp-Snooping Statistics - H3C s3100 series Command Manual

Dynamic host port(s):
MAC group(s):
MAC group address:0100-5e00-0001
Host port(s):Ethernet1/0/10
Table 1-1 display igmp-snooping group command output description
Field
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Router port(s)
( 00:01:30 )
IP group address
(::, FF1E::101)
MAC group address
Attribute
Host port(s)

display igmp-snooping statistics

Syntax
display igmp-snooping statistics
View
Any view
Parameters
None
Description
Use the display igmp-snooping statistics command to display IGMP Snooping statistics.
This command displays the following information: the numbers of the IGMP general query messages,
IGMP group-specific query messages, IGMPv1 report messages, IGMPv2 report messages, IGMP
leave messages and error IGMP packets received, and the number of the IGMP group-specific query
messages sent.
Ethernet1/0/23
Ethernet1/0/10
Total number of IPv6 multicast groups
Total number of IPv6 multicast sources
Total number of MAC multicast groups
Port flags: D for dynamic port, S for static port, C for port copied from
a (*, G) entry to an (S, G) entry
Number of router ports
Remaining time of the aging timer for the dynamic member port or
router port.
Address of IPv6 multicast group
(S, G) entry, :: represents all the multicast sources
Address of MAC multicast group
Attribute of IPv6 multicast group
Number of member ports
1-3
Ethernet1/0/23
Description