H3C s3100 series Command Manual page 151

Related command: display interface.
Example
# Display the brief configuration information about the Ethernet1/0/1 port.
<Sysname> display brief interface Ethernet1/0/1
Interface:
Eth - Ethernet
Loop - LoopBack
Speed/Duplex:
A - auto-negotiation
Interface Link
------------------------------------------------------------------------
Eth1/0/1 DOWN
Table 1-1 Description on the fields of the display brief interface command
Field
Interface
Link
Speed
Duplex
Type
PVID
Description
The state of an Ethernet port can be UP, DOWN, or ADMINISTRATIVELY DOWN. The following table
shows the port state transitions.
Table 1-2 Port state transitions
Initial port state
Not connected to
any cable
Connected to a
cable
GE - GigabitEthernet TENGE - tenGigabitEthernet
Vlan - Vlan-interface
Speed Duplex Type
A A hybrid 1
Port type
Current link state of the Ethernet port: UP, DOWN or
ADMINISTRATIVELY DOWN
Link rate
Duplex attribute
Link type: access, hybrid or trunk
Default VLAN ID
Port description string
DOWN
ADMINISTRATIVELY
DOWN
DOWN
UP
ADMINISTRATIVELY
DOWN
Cas - Cascade
PVID Description
home
Description
State after executing the
shutdown command
ADMINISTRATIVELY
DOWN
1-6
State after executing
the undo shutdown
command
DOWN
DOWN
DOWN
UP
UP