18.3 Formatting the HDD
18.3.1 Formatting the HDD for All Partition
When formatting the HDD for all partition, there will be partitions on the HDD and all these partitions will
be formatted (initialized) and the main controller will be made ready for use.
All the information needed to set up the partition is found in the partition settings file (on the SST, 'HD-
Format' in the folder 'iRYYYY').
[1] HDD (service part; without partitions)
[2] Formatting for full partition (only in safe mode)
[3] HDD after formatting
[4] Partition settings information file
HDD
[4]
iRYYYY
HDFormat
[2]
[1]
F-18-16
FSTDEV
TMP_GEN
TMP_PSS
TMP_FAX
APL_SEND
APL_MEAP
APL_GEN
APL_KEEP
IMG_MNG
PDLDEV
FSTCDEV
BOOTDEV
[3]
Chapter 18
0011-6755
18-9