Gestetner B070 Service Manual page 529

Number
Optics Anti-condensation Heater
H02
(option)
Drum Anti-condensation Heater
H03
(option)
Tray Anti-Condensation Heater 1
H04
(option)
Tray Anti-Condensation Heater 2
H05
(option)
H06 LCT Anti-Condensation Heater
HDD1 HDD 1
HDD2 HDD 2
NF1 Noise Filter
TC1 Total Counter
TH1 Fusing Thermistor
TS01 Thermostat 1
TS02 Thermostat 2
TS3 Drum Thermostat
SM
CÓPIA NÃO CONTROLADA
ELECTRICAL COMPONENT DESCRIPTIONS
Name
Turns on when the main switch is off to keep
the scanner unit dry.
Turns on when the main switch is off to
prevent moisture from forming around the
drum.
Turns on when the main switch is off to keep
paper dry in the paper trays.
Turns on when the main switch is off to keep
paper dry in the paper trays.
Turns on when the main switch is off to keep
paper dry in the LCT paper trays. Contains
two heaters.
Scanned image data is compressed and
held here temporarily.
Scanned image data is compressed and
held here temporarily.
Removes noise from the power line.
Counts the total number of copies.
In direct contact with the drum, detects the
temperature of the not roller.
One of a pair of wafer thermostats mounted
directly above the center of the hot roller to
monitor the temperature of the hot roller and
signal the CPU to switch it off if it overheats.
One of a pair of wafer thermostats mounted
directly above the center of the hot roller to
monitor the temperature of the hot roller and
signal the CPU to switch it off if it overheats.
Prevents the drum heater from overheating
6-13
CÓPIA NÃO CONTROLADA
Description
B070/B071