Fusing/Exit Motor Replacement - Gestetner B070 Service Manual

MOTORS
3.16 MOTORS

3.16.1 FUSING/EXIT MOTOR REPLACEMENT

[A]
[B]
1. Upper rear cover. (!3.1.4)
2. Open the controller box. (!3.1.4)
3. Swing down the BCU board. (!3.14.2)
4. Loosen screw [A] to release the belt tension.
5. Timing belt [B].
6. Fusing/exit motor [C] ( x 5,  x 2, clamps x 2)
NOTE: Disengage the hooks (x 2) [D] to remove.
NOTE: When re-installing the parts, hook up the tension spring (this automatically
gives the belt the correct tension), then tighten screw [A].
B070/B071
CÓPIA NÃO CONTROLADA
[C]
3-146
CÓPIA NÃO CONTROLADA
[D]
B070R921.WMF
SM