Gestetner B070 Service Manual page 118

INSTALLATION OF MFP CONTROLLER OPTIONS
1.12.6 IEEE 802.11B (B582)
Accessories
Description
1. IEEE 801.11b Board ..............................................................1
2. PCI Card ................................................................................1
3. Antennas ...............................................................................2
4. Velcro pads ...........................................................................2
Installation
Only one PCI slot (B3) is available for one of these options:
• USB 2.0
• IEEE 801.11b (Wireless LAN)
• IEEE 1394 (FireWire)
If another card is installed in B3, you must remove it before installing IEEE 802.11b
B582.
[C]
[B]
1. Switch the machine off.
2. Remove the cover [A] of Slot B3 ( x 2).
3. Detach the plastic protector [B] from the PCI card.
4. Insert the PCI card [C] into the wireless LAN board.
5. Insert the wireless LAN board [D] into Slot B3 and fasten it with the screws.
B070/B071
CÓPIA NÃO CONTROLADA
[D]
B580I108.WMF
1-84
CÓPIA NÃO CONTROLADA
Q'ty
[A]
SM