Hard Disks - Gestetner B070 Service Manual

CONTROLLER BOARDS, HDD

3.15.7 HARD DISKS

NOTE: The controller recognizes both disks as one disk unit; therefore, both disks
must always be replaced together, or there will be errors.
1. Remove the controller box cover. (!3.15.1)
2. HDD bracket [A] ( x 5,  x 4).
3. Hard disks [B] ( x 8).
4. If you intend to re-install the same disks in the machine, confirm the correct
connections before disconnecting. After the disks have been formatted, they
are not identical, and each disk must be connected to the correct connector.
NOTE: The external terminal connections of HDD_A and HDD_B are,
respectively, IDE1 and IDE2. In the Point-to-Point diagram, CN135 is
the connection point for IDE1 and CN136 is the connection point for
IDE2.
5. Install the new disks.
NOTE: If the disks are new and unformatted, they are both identical, and can
be connected in either position.
6. Turn the main switch on and execute 5832 001 (HDD Formatting – All) to
format the new disks.
7. Install the stamp data using SP5853. (!"Stamp Data Installation", 5. Service
Tables.)
B070/B071
CÓPIA NÃO CONTROLADA
[A]
B070R160.WMF
3-144
CÓPIA NÃO CONTROLADA
[B]
B070R943.WMF
SM