LASER UNIT
3.6 LASER UNIT
WARNING
• Direct exposure to the eyes can seriously damage the eyes and cause
permanent blindness. Always turn off the main power switch and unplug
the machine before attempting any of the procedures described below.
• Allow enough time for the machine to cool and for the polygon motor to
stop rotating. The polygon motor continues to rotate for about one to
three minutes after the machine is switched off.
• Never power on the machine with any of these components removed: 1)
LD unit, 2) polygon motor cover, 3) synchronization detector.
3.6.1 CAUTION DECALS
Two caution decals are provided for the laser section.
B070R966.WMF
B070/B071
CÓPIA NÃO CONTROLADA
3-34
CÓPIA NÃO CONTROLADA
B070R106.WMF
SM