Gestetner B070 Service Manual page 609

[C]
B070D907.WMF
When the waste toner collection bottle fills up, the pressure in the bottle increases
and the waste toner coil becomes harder to turn. When this occurs, the actuator
plate [A] does not rotate because the waste toner coil drive gear [B] has a torque
limiter, and the output of the toner overflow sensor [C] becomes constant. In this
condition, the operation panel LCD indicates "Waste Toner Full" and printing is
stops.
The bottle contains 1,300 g to 1,500 g of waste toner. About 2,400K copies can be
made before the waste toner bottle becomes full.
If the waste toner bottle is not properly installed inside the toner bank, the toner
collection bottle sensor [D] detects this condition and the operation panel LCD
displays SC496 (Toner Collection Bottle Error).
SM
CÓPIA NÃO CONTROLADA
[B]
[A]
6-93
CÓPIA NÃO CONTROLADA
TONER SUPPLY AND RECYCLING
[D]
B070D910.WMF
B070/B071