Tray Lock – Tray - Gestetner B070 Service Manual

For the 1st feed tray, the paper size has to be stored with SP5019 002.
For the 2nd and 3rd feed tray (universal trays), the paper size switch [A] detects
the paper size. The paper size switch contains five microswitches. The paper size
switch is actuated by an actuator plate [B] at the rear of the tray. Each paper size
has its own unique combination as shown in the table and the CPU determines the
paper size by the combination.
Using the asterisk setting (
sizes entered by the user (press the Tray Paper Settings key on the operation
panel). SP5112 must be set to 1 (Yes).
Main Scan Direction
Sub Scan Direction
6.14.7 TRAY LOCK – TRAY 2, 3
When the tray is placed in the paper feed unit, the lock lever [A] drops behind the
lock plate [B] on the support bracket to lock the tray in the proper position.
SM
CÓPIA NÃO CONTROLADA
*
), a wider range of sizes can be used for custom paper
Metric version
139.7 mm ~ 305 mm
139.7 mm ~ 458 mm
[B]
6-103
CÓPIA NÃO CONTROLADA
Inch version
5.5" ~ 12"
5.5" ~ 18.0"
[A]
B070D618.WMF
PAPER FEED
B070/B071