Gestetner B070 Service Manual page 949

Tech Service Bulletin No. B070/B071 – 001
FIRMWARE UPDATE PROCEDURE
1. Turn the main switch OFF.
2. Insert the SD card into the C3 slot on the right side of the controller box.
3. Turn the main switch ON.
Note: The machine automatically displays the firmware update screen.
4. Select "Network Support", "System", "Op. Panel. NA" and "BIOS" on the operation panel at
the same time.
Note: With some machines, "BIOS" is not displayed at this point. In this case, continue onto the next
step for the first three firmware types, and then repeat the procedure for BIOS.
5. Press the "Update (#)" key.
The firmware update will then begin, and the progress bar (*****___) will be displayed on the
operation panel.
The machine performs the firmware update in the following order:
"Network Support"
CÓPIA NÃO CONTROLADA
"System" "BIOS" "Op Panel"
CÓPIA NÃO CONTROLADA
Page 2 of 4