Gestetner B070 Service Manual page 48

COPIER (B070/B071)
B070I304.WMF
B070I010.WMF
6. Separate the upper connector [A] from the frame then disconnect it.
7. Separate the lower connector [B] from the frame then disconnect it.
8. Disconnect the suction hose [C] and set it on the hook [D] to prevent toner
leakage.
9. Pull out the development unit [E] ( x 2).
NOTE: To prevent scratching the drum, push the development unit slightly to
the right when pulling it out, and do not pull on the knob.
10. Place the development unit on a clean sheet of paper to prevent foreign matter
from being attracted to the sleeve rollers.
B070/B071
CÓPIA NÃO CONTROLADA
[A]
[B]
[E]
1-14
CÓPIA NÃO CONTROLADA
[D]
[C]
B070I924.WMF
SM