Bypass Tray Covers - Gestetner B070 Service Manual

REPLACEMENT AND ADJUSTMENT

3.2 BYPASS TRAY COVERS

[A]
1. Open the bypass tray. (!3.1)
2. Front cover [A] ( x 1).
3. Rear cover [B] ( x 3).
NOTE: Screw [C] is a wide thread screw. Be sure to fasten it here when re-
attaching the rear cover.
4. Push in the cover [D] to release the hooks from the slots under this side of the
cover.
5. Pull off the pick-up roller cover [F].
6. Top cover [E] ( x 3).
B512
CÓPIA NÃO CONTROLADA
[D]
[E]
4
CÓPIA NÃO CONTROLADA
[B]
[C]
[F]
B512R004.WMF
SM