Transfer Belt Unit Removal - Gestetner B070 Service Manual

TRANSFER BELT UNIT
3.9 TRANSFER BELT UNIT

3.9.1 TRANSFER BELT UNIT REMOVAL

[A]
B070R401.WMF
1. Turn off the main switch.
2. Remove the right inner cover. (!3.8.1)
3. Remove the transfer belt unit holder [A] ( x 1).
4. Connector [B] ( x 1).
5. While turning the lever [C] counterclockwise, take out the transfer belt unit.
NOTE: 1) Never touch the transfer belt with bare hands.
2) Work carefully to avoid scratching the drum with the transfer belt unit.
Reassembly:
1. Rotate the lever [C] fully counterclockwise, then install the transfer belt unit.
2. Insert the gear [D] into the opening [E] in the rear frame.
3. Place the slot [F] in the transfer belt unit on the rail.
4. Connect the connector [B] ( x 1).
B070/B071
CÓPIA NÃO CONTROLADA
[B]
3-66
CÓPIA NÃO CONTROLADA
[F]
[C]
[D]
[E]
B070R402.WMF
SM